There are no products listed under this category.
Shield long edges and delicate finishes with U profiles. The channel shape hugs edges to absorb knocks, resist strap cut-in and keep products pristine in warehouses and courier networks.
Explore our full edge-protection family: L Profiles (corner reinforcement) · Corner Profiles (caps & pads). Build stronger packs with Cardboard Sheets, Double Wall Boxes, Stretch Wrap and Packing Tape.
U profiles are channel-shaped protectors (typically rigid laminated board or foam-lined formats) that slide over an edge to provide continuous protection along its length. They cushion impacts, spread compression loads and create a safe bearing for straps and wraps.
Choose U profiles for long, exposed edges—panels, doors, benchtops, frames, flat-packed furniture, appliances and framed prints. Combine with L profiles or corner caps to protect the four corners as well.
Furniture & panels: run U profiles along tabletops, doors and shelves to prevent edge chips and scuffs.
Framed goods: protect picture frames and glazing edges—pair with face pads on the large surfaces.
Pallet builds: apply U profiles to outer edges before wrapping and strapping to distribute pressure.
Appliances: cushion metal or enamel edges to reduce transit abrasion and cosmetic returns.
Edge-to-edge coverage reduces localised damage compared with corner-only solutions.
Creates a stable surface for straps and stretch wrap; mitigates cut-in.
Paper-based options are widely recyclable; select grades to suit load and budget.
Best for long edge protection on panels, frames and appliances; pair with corner solutions.
Right-angle guards for outer corners; excellent under straps and pallet stacks.
Caps/pads for quick corner reinforcement and impact deflection.
| Type | Best for | Pros | Consider |
|---|---|---|---|
| U Profiles | Long edges, panels/frames | Continuous cushioning; great with straps/wrap | Add L/corner caps to protect the four corners |
| L Profiles | Outer corners, pallet loads | Fast placement; strong crush resistance | Doesn’t cover full edge length |
| Corner Profiles | Impact-prone corners | Quick clip-on protection | No continuous edge coverage |
| Cardboard Sheets | Face protection & layer pads | Distributes load; improves stack stability | Use with U/L for perimeter protection |
For heavy/fragile shipments, combine U profiles with double wall outers, add face pads and secure with stretch wrap and straps.
Measure the edge: match channel width and depth so the U profile grips without crushing the substrate.
Fit before wrapping: seat profiles along edges, then apply a light pass of stretch wrap to hold; complete wrap and strap to spec.
Protect faces: use cardboard sheets on broad surfaces to spread loads and reduce puncture risks.
L Profiles on corners for full perimeter protection.
Right-sized boxes to minimise void.
Pallet boxes for export and bulk loads.
U profiles protect the full edge length with a channel fit, while L profiles reinforce outer corners and vertical edges. Many packs use U along edges plus L/caps on corners.
Paper-based U profiles are widely recyclable. Keep them clean/dry and remove non-paper components before recycling.
Measure edge thickness and choose a channel that grips without compressing the product. Consider length to cover vulnerable spans fully.
Yes—U profiles provide a safer bearing for straps, reducing cut-in. Fit profiles, lightly wrap, then apply straps to the recommended tension.
No—they protect perimeter edges. Use inner cushioning (e.g., bubble wrap or paper bubble) to absorb shocks.
Whenever corners are exposed to impacts or stacking loads. Pair U profiles with corner profiles for full perimeter defence.